Composite insulated gloves provide electrical, mechanical and arc-flash protection, and as such do not need to be combined with any other kind of glove with mechanical protection.
The Composite glove range is made using a natural latex base covered by an outer layer of polychloroprene, combining mechanical resistance and comfort with a high level of protection.
Arc flash protection: the glove material has excellent properties in case of electric arc occurrence.
AVAILABLE IN SIZES: 7, 8, 9, 10, 11 and 12
MECHANICAL AND THERMAL REQUIREMENTS
Average tensile strength: ≥16 MPa
Average elongation at break: ≥600%
Tension set: ≤15%
Complementary test and performance levels to be achieved are as follows:
- Resistance to cutting: > 20 mm and 5N, according to ISO13997
- Resistance to abrasion: ≥0,05 mg/t
- Tearing resistance to: >25 N (equivalent to level 2 according to EN 388)
- Resistamce to penetration: >60 N (equivalent to level 2 according to EN 388)
- Resistance to very low temperatures: Conditioning of the gloves for 24 hours at -40 ºC. ± 3ºC.
- Flame-retardant test: Application of a flame for 10 seconds at a finger tip.