LAUNCH (SMARTSAFE) ECC01 AC/DC CURRENT CLAMP FOR EV Parameters Test Functions DC test, DC voltage test, and AC test Accuracy ±3%FS (23℃±5℃, below 75%rh) Battery 9V dry battery Phase Error ≤3°(AC50Hz / 60Hz, 23℃±2℃) Current Test Methods Clamp CT, non-contact measurement Zero-setting Adjust the ZERO key for zero setting Jaw Dimension φ16 mm×18 mm Frequency Response DC~ 50kHz Input Measuring Range 0~200A AC/DC Working Current 500mA Resolution 1 mA AC/DC Working Temperature 0~50℃ Output Gear 10mV/A (0~20 A), 100 mV/A(0~200 A) Dimension 278×71×37 mm Disclaimer: We are an authorized dealer of LAUNCH Malaysia since 2023. All products and details are all rights reserved by Launch's official management. Design and specifications are subject to change without notice. *Kindly Check For Stock Available From Us* !!Price Subject To Change Without Prior Notice!!   Special Item Required Pre-Order From Our Warehouse. Pre-Order Waiting ETA :  If Stock At Non-Johor Warehouse, Required 3 - 5 Working Days  If Stock Required Oversea Order, Reqiured Minimum 1 - 3 Months (Working Day)   Please Do Not Hesitate To Contact Us For MORE Information! SMFTOOLS Customer Service Hotline (012-6868099/010-7110168/017-2211141) Working Hour Monday-Saturday 9:00AM-5:30PM Sunday 10:30AM-2.30PM (Contact Before Visit) Location Address: NO.1397, JALAN LAGENDA 50, TAMAN LAGENDA PUTRA, 81000 KULAI, JOHOR, MALAYSIA. read more

GYS (FRANCE) CA360 | 12V/24V DC Lead-Acid Battery Charger Traditional 12 V & 24 V lead-acid battery charger. • For light, commercial, agricultural and heavy vehicle batteries from 40 to 350 Ah. • Unattended charging. • Ammeter charge indicator. • Reverse polarity protection. • Fully insulated charging clamps. Products Features :  • Can safely charge unsupervised due to automatic switch off once battery is fully charged. • Allows charging of the battery without disconnecting it: time saving whilst keeping the settings. • 2 charging modes (automatic or manual). • Storage compartment for cables and clamps. • Charge indicator with the ammeter • End of charge light indicator • ON/OFF luminous switch  • Copper wound transformer • 1.5m charging cables • 1.8m power supply cable Weight (G.W) : 14KG *Kindly Check For Stock Available From Us* !!Price Subject To Change Without Prior Notice!!   Special Item Required Pre-Order From Our Warehouse. Pre-Order Waiting ETA :  If Stock At Non-Johor Warehouse, Required 3 - 5 Working Days  If Stock Required Oversea Order, Reqiured Minimum 1 - 3 Months (Working Day)   Please Do Not Hesitate To Contact Us For MORE Information! SMFTOOLS Customer Service Hotline (012-6868099/010-7110168/017-2211141) Working Hour Monday-Saturday 9:00AM-5:00PM Sunday 10:30AM-2.30PM (Contact Before Visit) Location Address: NO.55, JALAN JALAN SRI PUTRA 2, BANDAR PUTRA, 81000 KULAI, JOHOR, MALAYSIA. read more

SINO ITALIAN STD402F | AUTOMOTIVE TYRE BALANCER Features : • Automatic measure of wheel distance and diameter • Automatic braking after spin • Automatic start/stop when the hood is lowered/raised • Automatic application of adhesive weights on unbalanced positions • STOP pushbutton to stop the machine immediately • Static and dynamic balancingi modes • Special balancing modes ALU, ALU* • Split function (or Hidden Weight) to hide the weights behind the spokes of rims • Rapid optimization (OPT) • Self-diagnosis and self-calibration • Exceptional stability in reading the unbalance between planes • Display in grams or ounces, in mm or inch • No anchor-down installation needed   Technical Data : - Max wheel weight : 75 kg - Wheel Diameter : 39'' - Rim Diameter : 10'' - 26'' - Wheel Width : 1.5'' - 20'' - Balancing precision : ± 1g - Resolution : 1.4 degrees - Cycle time : 7s - Balancing speed : 150 rpm - Noice level : < 70 dbA   - Power supply : 232V/50HZ/1PH *Kindly Check For Stock Available From Us* !!Price Subject To Change Without Prior Notice!!   Special Item Required Pre-Order From Our Warehouse. Pre-Order Waiting ETA :  If Stock At Non-Johor Warehouse, Required 3 - 5 Working Days  If Stock Required Oversea Order, Reqiured Minimum 1 - 3 Months (Working Day)   Please Do Not Hesitate To Contact Us For MORE Information! SMFTOOLS Customer Service Hotline (012-6868099/010-7110168/017-2211141) Working Hour Monday-Saturday 9:00AM-5:00PM Sunday 10:30AM-2.30PM (Contact Before Visit) Location Address: NO.55, JALAN JALAN SRI PUTRA 2, BANDAR PUTRA, 81000 KULAI, JOHOR, MALAYSIA. read more

SINO ITALIAN STD203 | Super-Automatic 10''-22'' Tyre Changer Super Automatic Tyre Changer, suitable for vehicle or motorcycle having rim size from 10'' to 22'' Rim. Optional with turn-table double speed bidirectional rotation system with hand switch control. Feature : • Tilting vertical arm with pedal control • Pneumatic system for lifting/lowering and locking the • operating arm • 24'' turntable • Bead breaker with double effect • Pneumatic cylinder • Extractable pedal unit Technical Data : - Rim clamping : 10'' - 24'' - Max. wheel diameter : 1,000 mm (39'') - Max. wheel width : 350 mm (15'') - Bead-breaker cylinder force : 2,500 kg [ at 10 bar ] - Operating pressure : 10 Bar (140 psi) - Power supply : 220V / 380 V - Motor power : 0.8kw/1.1kw - Max. spindle torque : 1,200 Nm - Max. inflating pressure : 3.5 bar (50 psi) - Packing dimension : mm 1080 (L)x920 (W)x1070 (H) - Gross weight : 279 kg - Packing dimension with help and press : mm 1130 (L) x 1380 (W) x 1860 (H) - Gross weight with help and press : 405 kg *Kindly Check For Stock Available From Us* !!Price Subject To Change Without Prior Notice!!   Special Item Required Pre-Order From Our Warehouse. Pre-Order Waiting ETA :  If Stock At Non-Johor Warehouse, Required 3 - 5 Working Days  If Stock Required Oversea Order, Reqiured Minimum 1 - 3 Months (Working Day)   Please Do Not Hesitate To Contact Us For MORE Information! SMFTOOLS Customer Service Hotline (012-6868099/010-7110168/017-2211141) Working Hour Monday-Saturday 9:00AM-5:00PM Sunday 10:30AM-2.30PM (Contact Before Visit) Location Address: NO.55, JALAN JALAN SRI PUTRA 2, BANDAR PUTRA, 81000 KULAI, JOHOR, MALAYSIA. read more

SINO ITALIAN STD6410 | Electro Hydraulic 2 Post Lift  Electro Hydraulic 4 Ton 2 Post Lift. III arm version with sliding adaptor, emergency hand pump & standard accessories. FEATURES · Electro-hydraulic driven lift with chain lifting system. · Synchronization of cylinders independent from load distribution with mechanical leveling system. · Mechanical safeties automatic engagement and release · Voluntary driven control · Automatic arm locking · Overload valve equipped · Lowering speed control valve included 24V safety control. · Anti-crushing protection SPECIFICATION Lifting capacity 4000 kg Max. Lifting Height 1900 mm Min. Height 98mm Overall Height 2826 mm Lifting Time 45 sec Lowering Time 50 sec Electric Supply 415 V / 50 Hz Weight 650  kg *Kindly Check For Stock Available From Us* !!Price Subject To Change Without Prior Notice!!   Special Item Required Pre-Order From Our Warehouse. Pre-Order Waiting ETA :  If Stock At Non-Johor Warehouse, Required 3 - 5 Working Days  If Stock Required Oversea Order, Reqiured Minimum 1 - 3 Months (Working Day)   Please Do Not Hesitate To Contact Us For MORE Information! SMFTOOLS Customer Service Hotline (012-6868099/010-7110168/017-2211141) Working Hour Monday-Saturday 9:00AM-5:00PM Sunday 10:30AM-2.30PM (Contact Before Visit)   Location Address: NO.55, JALAN JALAN SRI PUTRA 2, BANDAR PUTRA, 81000 KULAI, JOHOR, MALAYSIA. read more

1.2 Ton EV Battery/Multi-Purpose Electro Hydraulic Lift Table Model : UDP-7 Safety Features: 1. Easily transfer Without Installation 2. Elevates from 1100 -1800mm 3. The lift table is in either Pneumatic or Electric models 4. Angle adjustable table is built to meet with the battery bottom seamless 5. Convenient to position the table and carry the battery to the right placed horizontally in 30mam without moving the lift 6. The lift table also features high-quality components assembly for Fast & Precise lifting SPECIFICATION  Scissor Lift Release Automatic Release Ev Battery Lift Product Ev Battery Lift Product Code U-DP7 Capacity 1.2 T Max. lifting height 1800 mm (70.9'') Min. height 800 mm (31.5'') Platform length 1550 mm Total width 800 mm (31.5'') *Kindly Check For Stock Available From Us* !!Price Subject To Change Without Prior Notice!!   Special Item Required Pre-Order From Our Warehouse. Pre-Order Waiting ETA :  If Stock At Non-Johor Warehouse, Required 3 - 5 Working Days  If Stock Required Oversea Order, Reqiured Minimum 1 - 3 Months (Working Day)   Please Do Not Hesitate To Contact Us For MORE Information! SMFTOOLS Customer Service Hotline (012-6868099/010-7110168/017-2211141) Working Hour Monday-Saturday 9:00AM-5:00PM Sunday 10:30AM-2.30PM (Contact Before Visit) Location Address: NO.55, JALAN JALAN SRI PUTRA 2, BANDAR PUTRA, 81000 KULAI, JOHOR, MALAYSIA. read more

BESITA (TAIWAN) 102PCS 7DRAWER PROFESSIONAL ''NEW INSULATION'' GARAGE TOOL TROLLEY SET Model : 6651-EV Tools ● Designed for Electric vehicle maintenance, user safety. ● Insulated tools passes VDE/GS Insulation Test. *Kindly Check For Stock Available From Us* !!Price Subject To Change Without Prior Notice!!   Special Item Required Pre-Order From Our Warehouse. Pre-Order Waiting ETA :  If Stock At Non-Johor Warehouse, Required 3 - 5 Working Days  If Stock Required Oversea Order, Reqiured Minimum 1 - 3 Months (Working Day)   Please Do Not Hesitate To Contact Us For MORE Information! SMFTOOLS Customer Service Hotline (012-6868099/010-7110168/017-2211141) Working Hour Monday-Saturday 9:00AM-5:00PM Sunday 10:30AM-2.30PM (Contact Before Visit)   Location Address: NO.55, JALAN JALAN SRI PUTRA 2, BANDAR PUTRA, 81000 KULAI, JOHOR, MALAYSIA. read more

Mr.Cool KMC-8675 Automotive Air-Conditioner Flush Machine Suitable For All Of Automotive Air Conditioner Gases & Oil Types *Kindly Check For Stock Available From Us* !!Price Subject To Change Without Prior Notice!!   Special Item Required Pre-Order From Our Warehouse. Pre-Order Waiting ETA :  If Stock At Non-Johor Warehouse, Required 3 - 5 Working Days  If Stock Required Oversea Order, Reqiured Minimum 1 - 3 Months (Working Day)   Please Do Not Hesitate To Contact Us For MORE Information! SMFTOOLS Customer Service Hotline (012-6868099/010-7110168/017-2211141) Working Hour Monday-Saturday 9:00AM-5:00PM Sunday 10:30AM-2.30PM (Contact Before Visit) Location Address: NO.55, JALAN JALAN SRI PUTRA 2, BANDAR PUTRA, 81000 KULAI, JOHOR, MALAYSIA. read more